How to Hang Surround Sound Speakers Without Nails? [3 Useful Ways]
- 12 Dec 2022 04:38
- 376
Surround sound speakers can enhance your movie and music experience. You can use them to build a DIY home theater. However, many building owners occasionally forbid drilling because it might harm the structure. If it is your case, you should be here to learn how to hang surround sound speakers without nails. There are several choices, depending on how heavy your speakers are. Let's discuss all the solutions in this article!
How Do You Hang Surround Sound Speakers Without Nails?
Alien Tape and Command Hooks might work well for speakers that are light and medium in weight. You should utilize Picture Hooks to support the weight if your loudspeakers are heavy. You can mount light or heavy speakers using any of these three techniques without any nails.Command Hooks
Command Hooks
The command hook should be your first option if you're a tenant. Even when it is permissible, renting out a room may result in you having to cover the expense of drilling the wall. Lots of supermarket stores sell command hooks broadly. Alternatively, you can purchase it online. You can mount them for different purposes, including attaching pictures and holiday decorations. You may also apply them on window sills, metal, and even surfaces other than the wall. Choosing command hooks is a good idea for several factors. They are available. You may remove the wall hooks quickly and easily without leaving any residue. Moreover, it endures a long time, even for years. How do you stick small speakers to the wall? Let's look at the guides below.- Decide where you want to hang the speaker.
- After immersing the towel in rubbing alcohol, wipe the area with a moist one.
- Take the paper out.
- Attach the adhesive back of the command hook to the cleaned region. Stay in place for sixty minutes to give it time to form an adhesion.
- Then mount the surround speaker on the hooks.
Alien Tapes
Alien Tape
Our second suggested technique is to use Alien Tape to place your home speakers without nails. It's a good choice for installing a soundbar as well. A two-sided tape with a high adhesive backing is known as Alien Tape. It, therefore, holds greater weight than hooks and is more sticky. The best factor of this tape is that you can trim it to fit the soundbar's length. Otherwise, it can also accommodate speakers of any size. You can remove the Alien Tape just as simply as command hooks without hurting the wall or leaving any residue. But it can firmly support speakers that are of average weight. However, remember that corrugate or porous surfaces like bare brickwork do not adhere to Alien Tape well. It is recommendable to adhere to a flat surface, such as glass, ceramic, wood, or plastic. Because this tape is reusable, you can utilize the same item in your new place. The following detailed instructions will show you how to hang surround speakers with Alien Tape.- Decide where you want to hang the gadget.
- Clean the surface with rubbing alcohol. After cleaning, dry the area.
- Cut the tape into segments to suit the length of the speakers.
- Stick the tape to the just-cleaned wall.
- Place the speaker on top of the tape and press it for a while.
Picture Hooks
Picture Hooks
The principal use of picture hooks is to hang pictures on walls. But they also provide a good alternative for hanging surround sound speakers from the ceiling. Screw the speakers to the wall so there is almost no chance of them falling. There are several types of hooks for hanging large speakers, depending on the weight constraints. Follow these procedures to hang speakers from picture hooks:- We will apply the same method as we did with Command Hooks and Aline Tape in steps 1 and 2.
- You need a hammer to install the hooks. Then, draw a position with a pencil where you will connect the picture hook.
- Attach the hook with a hammer after you've placed it there.
- You should check if there is a pre-drilled gap on the back when purchasing your speakers. Otherwise, you may have to drill some holes.
- After that, gently attach the speaker to the picture hooks.